How to use VAG Access Code for 4th 5th IMMO MQB All Keys Lost?

With Xtool VAG Point Code, Xtool X100 PAD2, X100 PAD2 PRO / X100 PAD3 will be granted for calculation access via OBD2 for VAG 4th & 5th immobilizer systems and MQB-platform, for all keys lost (AKL) key programming i.e golf 7 2013. NO EEPROM REQUIRED!

 

During this process,  internet connection is required, so that Xtool Pad is able to connect to VAG servers and perform calculation. After the calculation is done, your tablet will have unlimited access to that same vehicle.

 

After ordered from obdii365.com, you will receive an email with your activation code. Keep this email handy, because you are supposed to enter the code at the time of programming.

 

 

Xtool VAG Point Code Operation Guide:

Tap ” the vehicle system”:

1). VW 4th Immobilizer System

2). Audi 5th Immobilizer System

3). Audi MQB Platform

 

2. Tap ” Online Mode”.

3. Receive a prompt “This password needs to be paid to get it, please contact your local dealer or Xtool. Just input your code.

4. Upon inputting a valid code, the calculation will start. It will take 30 seconds to 3 minutes.

5. If the calculation succeed, you will receive a message “Get data successfully!”
   
   
   
   

If your internet was interrupted during the online calculation, you will receive a error screen (shown as below). Don’t worry, your VAG Point Code is still available to use if the calculation fails. Just have the second try to start the calculation using the same code.

 

6. Upon getting a message “Get data successfully!”, you will be able to now add a key or perform all keys lost for VAG 4th / 5th IMMO & MQB immobilizer system.

 

Enjoy!

 

Xtool Point Code is only for 10usd here:

https://www.obdii365.com/wholesale/xtool-mqb-point-card.html

Xtool Updated Audi A6 A7 A8 5th IMMO All Keys Lost

 Xtool Tech published new Audi software V28.03 adding Audi 5th generation key programming function via OBD.

 

Add all smart key lost network automatic calculation function
All smart key lost via OBD covering A6 A7 A8

This update can be applied to Xtool X100 PAD3 (X100 Pad Elite) and Xtool X100 PAD2

*Require KC501 or KC100 adapter to work with.

Solved! Xtool X100 Pro2 Update System Error

 Here offer the solution for XTOOL X100 Pro2 “System File Error!” after updating. This is the problem that has been asked by many customer recently.

 

Attach one customer’s feedback as below:

i have a tech problem with X100 pro2.

I updated the system, and when i tried to use the tool it showed “!!! System File Error!!!”.

I was talking with a mexican guy who had a similar problem, and he told me that i need the backup of the original folders that are found in the memory of the tool, so i think that would solve my problem.

 

obdii365.com engineer replied:

There is a problem with the files in the card, Please format the device and upgrade it again.

XTOOL X100 Pro2 update video:

https://youtu.be/bLbZDLO5_mo

 

Finally, the customer told us that he followed our advice to do and “It worked nicely. Thank you for your time!”

 

If you have the same problem above, please try to solve it with the method our technician provided.

Hope it helps!

Xtool Adds GM 2018 Up Security Code Reading

Xtool tech programmers (xtool x100 pad2, x100 pad3, autopropad, ps90  etc) updated GM security password reading models after 2018 in July 2020.

GM Key Programming Upgrade
Add read password function (after 2018)
For GM version V27.80
Model   Year
Verano 2018-
Regal 2018-
Lacrosse Lacrosse NAO 2018-
Excelle 2018-
Envision 2018-
Cruze 2018-
Malibu 2018-
Equinox 2018-
Trailblazer 2019-
Cadillac CT6 2018-
Cadillac XT4 2018-
Cadillac XT5 2018
Cadillac XT6 2018-

Xtool KC501 Mercedes IR Key Programming Car List

The Xtool KC501 chip and key programmer adds Mercedes Benz Infrared key function list on July 30th, 2020.

Supports following Mercedes IR key programming:
Model Years
A Series 2005-2013
B Series 2005-2014
C/CLK Series 2006-2014
CLA Series 2013-2016
CL Series 2006-2013
CLS Series 2006-2013
E Series 2005-2015
G Series 2015
GL/CLG Series 2006-2014
GLC/GLK Series 2008-2015
M/ML Series 2006-2013
R Series 2006-2017
S Series 2006-2017
SLK/SLC Series 2006-2016

Note: KC501 is not compatible with x100 pad2, it should be used with xtool x100 pad3, i80, auto pro pad.

Xtool X100 PAD3 Adds Toyota CHR 2019 Spare Key Success

Today I have duplicated a spare Toyota CHR 2019 smart Key with xtool X100 pad3 successfully.

Select Immobilizer->Toyota->Smart Key System->Prox 3 (proximity)->Add a smart key

Put original key close to the Start button

Put the new key close to the Start button

Follow x100 pad3 prompts until succeed.
Test the new key.

Done.

How to use Xtool X100 PAD3 to Read EEPROM 93C46?

The Xtool EEPROM adapter can be used to read pin code, initialize data, read eeprom and adjust mileage when using with x100 pad2 or x100 pad3. 

Xtool x100 pad3 and eeprom adapter can read following eeprom chips:
24C01  24C02 24C04 24C08 24C16 24C32 24C64 25010 25020 25040 25080 25160 25320 25640 25128 25256 93C46 93C56 93C57 93C66 93C76 93C86 95010 95020 95040 95080 95160 95320 95640 95128 95256

Here is the example on reading 93c46 eeprom with pad3 and adapter.

Connect the EEPROM chip to the EEPROM adapter, then connect with x100 pad3 via main cable.
Connect the power supply, be sure to connect the power supply adapter before operating.

In x100 pad 3, select Diagnosis->Other service- >EEPROM Adapter-> EEPROM Program

Make sure the adapter is connected and powered on, the status light is turned on

Select 93CXX series->93C46->Read EEPROM data

Input data name to be saved

Read data success

You can check saved file in Report->File Management->Adapter folder.

Done.

www.obdii365.com

Xtool KC501 and KC100 Adapter Comparison

Xtool KC501 Key & Chip programmer, working together with Xtool tablets, is an upgrade version of KC100 IMMO adapter. The following parts are about their details.

Part 1: Table compatible 

	Xtool KC501	Xtool KC100
Image
Release time	2020	2017
Applicable key programmer	Xtool X100 PAD2, X100 PAD3 (X100 Elite), H6, H6 Pro, i80, Auto pro pad	X100 PAD3, X100 PAD2,  EZ500,  PS80, PS90, A80 etc
Generate dealer keys	Yes, when working with Xtool X100 PAD3	No
Read and write Mercedes Infrared keys	Yes	No
Detect key ID	Yes	No
Detect key frequency	Yes	No
Connect to PC (stand-alone)	Yes. Download PC software on official site.	No
Volkswagen/Audi/Skoda 4th key programming	Yes	Yes
Volkswagen/Audi/Skoda 5th key programming	Yes	Yes
MQB key programming	Yes	Yes
Volkswagen/Audi/Skoda 4th generation 96-bit online	Yes	Yes
Volkswagen/Audi/Skoda 5th IMMO generation online	Yes	Yes
MQB online key  programming	Yes	Yes
BMW CAS1-CAS3++ key  programming	Yes	Yes
BMW EWS2 EWS3 EWS4 key programming	Yes	Yes
Land Rover after 2015 year smart key write start key	Yes	Yes
Fiat Viaggio, 500, Palio and other models IMMO key programming	Yes	Yes
Toyota/Lexus all smart keys lost key programming without dismantling, including 94, 98, 88, A8, A9, 39 simulation key generation.	Yes, require KS-01 emulator as well	Yes,require KS-01 emulator as well

In sum:

1). KC501= KC100+BENZ IR+ Detect key ID + detect key frequency

2). KC501 can be used stand-alone based on PC software. KC100 cannot.

3). KC501 performs similar function as Autel XP400 to IM608.

Part 2: Xtool KC501 key and chip programmer details

Xtool KC501 is a professional Key & chip programmer which can not only read, write keys and read key remote frequency, but also generate dealer keys. It support read and write MCU/EEPROM chips, read and write Mercedes Infrared keys. Moreover, it support PC connection which brings you better user experience.

Xtool KC501 function

Powerful chip reading and writing 
Can read, write, erase various chips including registers, single-chip computers, anti-theft, etc., and can read and write more than 120 EEPROM, 7 MCU, and 11 ECUs.

Full-featured key
It supports automatic key recognition, partial key reading and writing, key generation, key information reading, key checking and locking, key unlocking etc.

Compatible with multiple devices, expanding anti-theft matching
It can be connected to the tablet as a immo key programmer, and supports the connection of i80 PAD, X100Pad2, and Auto pro pad.

KC501 PC Software:

Parameters:

Display Screen: 320×480 dpi TFT Colorful Screen

Working Voltage: 9V-18V

Working Temperature: -10℃-60℃

Storage Temperature: -20-60℃

Power supply: 12V DC

Appearance Size: 177 mm* 85 mm* 32 mm

Weight: 0.32 KG

How does Xtool KC501 work?

The anti-theft matching function is an operation to synchronize the car key with the anti-theft data of the vehicle

Synchronize key data to car

Write vehicle data to the key

Key data reading and writing
Method 1: Ignition coil.

Method 2: by programmer

Car immo data reading and writing

Method 1: Read through OBD port

Method 2: Physical reading

Buttons description:

1. Power connector
   2. USB communication port
   3.DB26 port
   4. Cross signal pin
   5. EEPROM locker
   6. EEPROM slot
   7. Indicator
   8. Display
   9. Frequency detection button
   10. ID detection button
   11. Key chip hole
   12. Key slot
   13. Remote sensing area
   14. Mercedes-Benz Infrared Hole

Scenes to be used:

Xtool KC501 parts and accessories:

Part 3: Xtool KC100 IMMO adapter highlights:

Support Volkswagen/Audi/Skoda 4th generation, 5th generation, MQB key programming
Support Volkswagen/Audi/Skoda 4th-generation 96-bit online, 5th-generation online, MQB online key programming
Support BMW CAS1-CAS3++ key matching
Support writing start smart key for Land Rover after 2015 year.
Support Fiat Viaggio, 500, Palio and other models
Support Toyota/Lexus all lost key programming without dismantling, can realize 94, 98, 88, A8, A9, 39 simulation key generation (require KS-01 emulator).

Parameter:

Size: 140mm x 60mm x 26mm

Working voltage: USB  5V

Working temperature: -20℃ ~ 60℃

Sending and receiving distance: ≤2CM

Frequency: 125KHz

Storage temperature: -30℃ ~ 80℃

Key data reading and writing:

Method 1: via the ignition coil

Method 2: Xtool X100 PAD2 key programmer + KC100 adapter

Car immo data reading and writing:

Method 1: read via OBD port.

Method 2: Read and write by disassembling.

Enjoy!

http://blog.obdii365.com/2020/07/20/xtool-kc501-vs-kc100-immo-adapter/

How to use Xtool to Program EWS2 EWS3 EWS4 Key?

Xtool supports BMW EWS2 EWS3 EWS4 all keys lost and add key, but not by OBD2. You need to read D-FLASH/EEPROM data first.

Device required:

Xtool x100 pad2/ x100 pad3/x100 elite/ h6 pro/autopad

Xtool KC100 adapter or KC501 chip & key adapter

Xtool BMW EWS2/EWS3/EWS4 User Manual

First of all, remove EWS unit and backup D-FLASH/EEPROM data with chip programmer

Connect xtool tablet with vehicle via OBD socket

Enter Immobilier function->BMW->EWS

Read Key Info: this function can read data from key chip. If doesn’t work, it means key chip is incorrect or locked.
Click “Read Keys Info”

Connect KC100 or KC501, and enter activation page

Put key chip inside KC100 or KC501

Check if the key has been placed in the coil
Reading key

After read key info successfully, it will prompt you to input folder name of the key

It will show key data info as below

Write start key: This function can generate dealer key. After dealer key generation is completed, put chip inside key and manually program the remote to start the car.

Click “Write start key” menu, it will prompt put a new key into KC100 or KC501, click OK to continue

It will prompt you to choose D-FLASH or EEPROM data

(Note: this data is the backup data which are read through EWS disassembly)
It will prompt the VIN and EWS type of current chosen D-FLASH/EEPROM data, click OK to continue

After D-FLASH analysis, it will show key info.

Choose an unused key position, and then click “Write start key”

Creating key

Make dealer key success.

When key is programmed successfully, put key chip back inside the key and manually program remote, then it can start the car.

Done.

http://blog.obdii365.com/2020/07/19/xtool-bmw-ews2-ews3-ews4-key-programming-manual/