Xtool TP200, X300P, X100 Pro2, X100 Pro, X300 Plus Update Online

Here's step-by-step online update guide of xtool products, including TP200, X300P, X100 Pro, X100 Pro2, X300 Plus.

Step 1: Visit Xtool official website http://www.xtooltech.com
Step 2: Select product you desired,  download and Install the upgrade tool installation package

Step 3:  Extract the installation package into an upgrade tool

Step 4:
Connect xtool device to Windows computer with Type-c cable; (If the USB device cannot be recognized.
Use this method: 1) insert the TYPE-C connector halfway to make the screen light up.  2)  then insert all of the TYPE-C connector to identify the USB device)

Step 5: 
Open the upgrade tool,input the Product SN and Password,then click login;
(Certificate of conformity with S / N and password.
Note: The serial number begins with the three letters PRO)

Step 6: Select the required language upgrade;

Step 7: Wait until the upgrade completed.
http://www.obdii365.com/wholesale/brand-xtool/

Xtool X100 PAD2 Read Citroen Relay 2005 93C56 EEPROM

Citroen relay 2005 immo box data read successfully using the xtool x100 pad2.

Connect x100 pad2 with eeprom adapter, solder 93c56 eeprom chip with clip adapter

In x100 pad 2, select Other Service->EEPROM adapter->EEPROM Program->93CXX series->93C56->Read EEPROM data

Make sure the adapter is connected and powered on, the status light is turned on

Read immo box data success. Save data, i.e Fr

You are allowed to edit data by pressing Yes.

Write file back with some ff in first couple of lines. Wrote back and the read again to confirm written and was ok.

www.obdii365.com

http://www.key-programmer.org/2020/05/07/read-citroen-relay-2005-data-93c56-with-xtool-x100-pad2/

AutoProPad and Xtool X100 PAD2 Which is Better?

Question: What is the difference between the auto pro pad and the x100 pad 2 pro? Do they both do all the same functions?

First let’s check the table comparison:

Item	Xtool X100 PAD2 (Pro Full)	Xtool AutoProPad (Full)
Image
Brand	Xtool Tech (Universal)	XToolUSA
OS	Android 4.4.4	Android
Processor	Quad Core, 1.6 GHz	Quad-Core 1.60 GHz
Memory	2GB RAM, 32GB Flash	1GB RAM, 8GB Flash
Screen Display	8.0 Inch IPS 5-Point Multi-touch Screen with 1024×600P Resolution	8.0″ Touchscreen
Camera		5.0MP Rear-Facing w/ Flashlight
Battery	4000mAh, 7.4V	4000 mAh, 7.4V Lithium-Polymer Battery
WiFi	WIFI 2.4Ghz	Yes
Dimension	(L*W*H): 240*177*30mm	9.45″W x 6.97″H x 1.18″D
Other Configuration	Basic version Pro full version	Basic version Lite version Full version
Update	Free Update for 2 years	Free Update for 1 year
Update subscription	$400 per year	$600 per year
Language	English, Spanish, French, Turkish, Indonesian, Thai, Portuguese	English
Main functions	IMMO Transponder & Remote Programming	Transponder & Remote Programming
Special functions	4-system OBDII diagnosis, Oil service reset, Odometer correction, TPMS reset, TPS, battery reset, DPF, EPB, Steering Angle Calibration	Automotive Diagnostic Functions: reading & clearing fault codes. Also includes a plethora of other diagnostic capabilities (fully functioning OBD2 diagnostic tool for auto shops).
VAG 4th & 5th IMMO	Yes, require KC100 adapter (default in full package)	Yes, require KC100 Key Tag Tool
EEPROM adapter	Yes	Yes
Tokens	No	No
Competitors	OBDSTAR X300 DP Plus, Lonsdor K518ISE etc	SMART Pro, MVP Pro, TCode Pro
For sale price	Basic version: $649 Pro version:$828	Lite version: $999.99 Full version: $1,995
Car List	Xtool x100 pad2 car list	Autopropad car list

Most parts are same,both from XTOOL technology. Auto pro pad focus on American vehicles. x100 pad2 pro focus on more models (EU) and it specialized in VW 4th 5th vehicles key Immobilizer.

Xtool AutoProPad is made for US market and requires updates but updates are free for first year. No Chrysler pin codes tho (except for fobik).

Xtool X100 Pad2 Pro is for other countries market and comes with 2 options. Basic or full for VW AUDI stuff too. No tech support but does all Nissans to current with ease. And not very good for older stuff old fords old Honda’s etc. also does GM no prob including prox and remotes. It’s a good device for the price.  No Chrysler pin codes except for fobik.

Is the autopropad the same as other xtool devices?

This is different than other XTool machines you may see on sale in other countries. The AutoProPAD is the only XTool machine made for locksmiths in the US market and includes extra OBD2 and EEPROM software specific to United States vehicles. The cheaper devices such as the PS80, PS90, X100PAD, or X100 have some of the same hardware but mainly performs only the advanced vehicle diagnostic functions that an auto shop might use. For instance, if you purchase a PS80 (instead of an AutoProPAD), you will not be able to program Nissans with 20-digit BCM, Ford Fusion without NASTF, Toyota G, Toyota H, Toyota Smart Keys, Chrysler 200 systems, most Chrysler PIN code reads, VW/Audi programming, Honda Prox, and many others.

What is the Difference Between the AutoProPAD and the AutoProPAD LITE?

The AutoProPad is currently available in three versions; the “Basic Version,” the “Lite-Version” and the “Full-Version.”  All three tools use the same basic machine and software.  The differences between the versions are the accessories and optional components that are included.

The LITE is more for OBD2 programming only and does not have the extra adapters needed for things like EEPROM (reflashing) and transponder chip pre-coding. It is lighter and more compact (7″ screen instead of 8″ screen) than it’s bigger brother, but both are the same speed, the same memory, and program the same vehicles. The only exception to that is that some vehicles (newer BMWs and VWs, specifically) require the pre-coding adapter, which is not provided with the AutoProPAD LITE.

What’s the difference between xtool x100 pad 2 basic and full (pro) version? 

AutoProPAD Current & New Stand-Out Features:

• • Chrysler / Jeep / Fiat new system PIN reading & programming
  • Chrysler CAN PIN reading & programming
  • Ford 128-Bit add-a-key & all-keys-lost programming
  • Ford Fusion 2013+ system rolling code bypass (no NASTF needed)
  • Ford 10-Minute bypass on all-keys-lost for all Ford systems: Bypass the normal 10-minute wait.
  • Ford parameter reset
  • Ford/Lincoln/Mercury keyless entry keypad code read
  • GM PIN code reading
  • GM Remote Programming
  • Honda 2017 proximity system programming
  • Honda transponder programming: Super-quick!
  • Hyundai & Kia old PIN codes: converts VIN to PIN for 2007 and older
  • Hyundai & Kia new PIN code read: No more buying PINs from the dealer (smart keys)
  • Nissan BCM to PIN conversion: Supports the 5-digit and 20-digit BCMs
  • Subaru G-Key (80-Bit) add-a-key & all-keys-lost programming
  • Toyota H-Chip programming w/ no 16-minute wait
  • Toyota G-Chip programming w/ no 16-minute wait
  • Toyota/Lexus proximity system 6 & 7 programming all-keys-lost & add-a-key (ie. 2017 Toyota CH-R & Prius Prime)
  • VW/Audi 2013-2016 programming for add-a-key
  • VW Touareg 2005
  • Chrysler Pacifica 2016+
  • Volvo key programming (2008-2015 select models/non-prox)
  • Maserati key programming (2015-2017 Quattro Forte & Ghibli)
• AutoPro PAD New Features Releasing Soon:
• Audi/VW 2013-2016 programming for all-keys-lost (coming Q1 2019)
• Chrysler Type2 PIN read via OBD2 (coming Q4 2018)
• Hyundai & Kia new PIN code read: (slot keys) (coming Q1 2019)
• Subaru 2017 MSOP EEPROM in-circuit programming w/ adapter (coming 2019)
• Transponder motorcycle programming (coming 2019)
• Fiat 500/Dodge Promaster/Promaster City key programming (coming Q4 2018)
• Full PIN read for all 2017-2018 GMC vehicles (coming Q4 2018)
• http://blog.obdii365.com/2020/05/06/xtool-autopropad-vs-xtool-x100-pad2/