Program Toyota Prius 2014 All Keys Lost with Xtool X100 PAD

 How to program a new key for a 2014 Toyota Prius push start proximity all keys lost with xtool x100 pad (pad2/pad3) via OBD. The same procedure can be applied to Prius from year 2010 to 2018.

 

Select IMMO- Toyota- Key- By Vehicle- Prius- Proximity- 2010 to 2018- Reset Smart Key ecu (Smart Box)- Reste ECU (All keys lost)

Reset smart box takes about 16 minutes.

Reset smart box success

Select Program smart key after resetting

Put a new smart key to close the Start/Stop button

Program complete

Test new key

The new key can start the vehicle, remote control works as well.

Done.

http://www.key-programmer.org/2021/12/22/program-toyota-prius-2010-2018-all-keys-lost-with-xtool-x100-pad/

New Xtool X100 PAD OBD2 Keeps Loading Solution

 Problem:

I need help on my new xtool x100 pad can you assist me

Obd2 function not working

Just loading forever.

 

Solution:

Go to Quick Support function, you will see a 9-digit ID, press SEND MY ID.   obdii365.com customer service will have xtool engineer to assist you via Teamviewer.

Then accept the connection. Xtool engineer will access to your x100 pad system. Then detele or download necessary software program.

Don’t quit until you are told to.

Try again after finish downloading software.

http://www.key-programmer.org/2021/10/21/xtool-x100-pad-keeps-on-loading-interface-solution/

How to Solve Xtool Keeps Giving Network Error?

 Problem: 

I received the Xtool PS90 tablet. When register to activate the scanner, it kept giving network error but network is working my account keeps informing me i signed in but the tablet says not its frustrating any software i can download to fix?

 

Solution:

Check network connection. If network connection has no problem. The error may cause by the low App version.

Delete older Xtool App and install latest version. Problem will be solved.

The solution fits other Xtool products, X100 PAD, X100 PAD2 etc.

 

Xtool EZ500 vs. EZ400 vs. EZ300 vs. PS80 vs. PS90

What's the difference among Xtool tablets, X100 pad, EZ500, EZ400, EZ300, PS80 and PS80? Check table comparison below:

Item	X100 Pad	EZ500	EZ400	EZ300	EZ500/PS80 /PS90
Operating System	Android 5.1.1	Android 4.4.4	Android 4.4.4	Android 4.4.4	Android 4.4.4
Screen	7.0 Inch	8.0 Inch	7.0 Inch	7.0 Inch	8.0 Inch
Resolution	1024×600P	1024×600P	1024×600P	1024×600P	1024*600P
Battery	4000mAh, 3.7V	4000mAh, 7.4V	2400mAh, 3.7V	4000mAh, 3.7V	4000mAh, 7.4V
Memory	1GB RAM 16GB Flash	1GB RAM 16GB Flash	1GB RAM 16GB Flash	1GB RAM 16GB Flash	2GB RAM 32GB Flash
CPU	Quad Core, 1.6 GHz	Quad Core, 1.6 GHz	Quad Core, 1.3 GHz	Quad Core, 1.6 GHz	Quad Core, 1.6 GHz
Full-System diagnosis		Yes	Yes	Engine, ABS, STS, AT 4 systems	Yes
Immobilizer	Yes	Yes			Yes
Oil Reset	Yes	Yes	Yes	Yes	Yes
EPB Reset	Yes	Yes	Yes		Yes
Throttle sensor reset	Yes	Yes	Yes		Yes
Odometer	Yes	Yes			Yes
SAS	Yes	Yes			Yes
Gear learning	Yes	Yes			Yes
ABS Bleeding	Yes	Yes			Yes
ECU Reset	Yes	Yes			Yes
TPMS Reset	Yes	Yes			Yes
Battery Replacement BMS Reset	Yes	Yes			Yes
Update	2 Years Free Update

In Summary:
1.Xtool X100 PAD, EZ500 and PS80/PS90 supports all these special functions, but x100 pad does not perform full-system diagnosis function.
2.EZ400 supports less special functions.
3.EZ300 is a four-system diagnostic scanner.

http://www.obdii365.com/service/xtool-x100-pad-vs-ez500-vs-ez400-vs-ps80.html

Program Hyundai I20 Elite Remote by Xtool X100 PAD

It is very simple to generate and program a remote to Hyundai i20 elite.

Here, will show you the how-to’s
All will be done with
VVDI mini key tool (generation)
Xtool x100 pad (programming)

Steps:

Step 1: generate Hyundai remote using mini key tool

the dashboard status

remote board is connected with mini key tool

run the mini key tool app
select a car model: Hyundai I20 Elite India

the remote info: RKE-4F22 15- 3BTN 1218

mini key tool starts to generate remote

programmed the remote successfully

put the battery inside remote and test it

works good!

Step 2: program Hyundai remote using Xtool X100 Pad

go to X100 PAD

program immobilizer

select from type – program remote – 16 pin – type 1




note: switch ignition on and then off and remove the key

program remote: press lock and unlock for more than 1s

remote programming is complete

test the remote

the functionality is good! success
http://www.obdii365.com/wholesale/xtool-x100-pad-with-built-in-vci.html