Notice! ! ! During the upgrade process, please do not operate the buttons of the Xtool X100 Pro2 or disconnect the data cable. After the update is successful, please unplug the data cable and then reconnect it.
Can anyone help me please? My xtool x100 pro2 was working good so I wanted to update it but it didn’t work so I format it and now is not working at all.
Solution:
It is working now. Hold down this button, then connect the USB to update again.
follow the guide here to update Xtool Xtool Pro2 via PC
Both Xtool X100 Pro2 and Xtool X100 Pro3 are handheld scanner, they share the same OBDII scan and immobilizer key programming functions. Xtool X100 Pro3 has no odometer correction function and adds 5 special functions including Oil light reset, EPB (Electronic Parking Brake), Steering Angle Sensor (SAS) Service, TPS (Throttle Matching) and ABS Bleeding.
For language and update, there is no much difference.
Here offer the solution for XTOOL X100 Pro2 “System File Error!” after updating. This is the problem that has been asked by many customer recently.
Attach one customer’s feedback as below:
i have a tech problem with X100 pro2.
I updated the system, and when i tried to use the tool it showed “!!! System File Error!!!”.
I was talking with a mexican guy who had a similar problem, and he told me that i need the backup of the original folders that are found in the memory of the tool, so i think that would solve my problem.
Step 1: Visit Xtool official website http://www.xtooltech.com Step 2: Select product you desired, download and Install the upgrade tool installation package
Step 3: Extract the installation package into an upgrade tool
Step 4:
Connect xtool device to Windows computer with Type-c cable; (If the USB device cannot be recognized.
Use this method: 1) insert the TYPE-C connector halfway to make the screen light up. 2) then insert all of the TYPE-C connector to identify the USB device)
Step 5:
Open the upgrade tool,input the Product SN and Password,then click login;
(Certificate of conformity with S / N and password.
Note: The serial number begins with the three letters PRO)
Here's the quick guide on Porsche Cayenne 2010 up odometer correction using the xtool x100 pro2 via OBD in 3 minutes.
Mileage correction is so quick, simple and easy to do, and its all done via the OBD2 diagnostic port.
You can also do key programming & EEPROM with the Xtool X100.
Original mileage: 105657 mile
Connect x100 pro2 with vehicle via OBD port
Select Dashboard->Europe->Porsche->Cayenne->2010 up ->Backup and mileage->Mile
Select New File
Enter new mileage you desired (i.e 400 mile) and confirm
Cummincating... Mileage correction completed.
Check the new mileage on dashboard: 399 mile
You can also recover mileage. Select Recovery.
The mileage will be in original status.
xtool x100 pro 2 will correct mileage for following Porsche models:
911
918
996
997
Boxster
Cayenne
Cayman
Panamera
X100 Pro2 will do mileage correction for other car brands:
Audi
Buick
Cadillac
Chrysler
Fiat
Ford
GMC
Hummer
Hyundai
Kia
Infiniti
Jaguar
Land Rover
Mitsubishi
Nissan
Seat
Skoda
VW
Pontiac
Mercedes
Ferrari
Volvo
Mazda
Porsche
But please check with the listing to make sure that your specific vehicle is covered. http://www.obdii365.com/wholesale/xtool-x100-pro2-key-programmer.html
Xtool X100 Pro2 comes to replace Xtool X100 Pro (1st generation), Xtool Pro2 is compatible with newer car models, it is free update for 2 years. Xtool X100 Pro2
There are thousands of car makes to be covered by Xtool X100 Pro2 (Listed below).
