Program Hyundai I20 Elite Remote by Xtool X100 PAD

It is very simple to generate and program a remote to Hyundai i20 elite.

Here, will show you the how-to’s
All will be done with
VVDI mini key tool (generation)
Xtool x100 pad (programming)

Steps:

Step 1: generate Hyundai remote using mini key tool

the dashboard status

remote board is connected with mini key tool

run the mini key tool app
select a car model: Hyundai I20 Elite India

the remote info: RKE-4F22 15- 3BTN 1218

mini key tool starts to generate remote

programmed the remote successfully

put the battery inside remote and test it

works good!

Step 2: program Hyundai remote using Xtool X100 Pad

go to X100 PAD

program immobilizer

select from type – program remote – 16 pin – type 1




note: switch ignition on and then off and remove the key

program remote: press lock and unlock for more than 1s

remote programming is complete

test the remote

the functionality is good! success
http://www.obdii365.com/wholesale/xtool-x100-pad-with-built-in-vci.html

Xtool X100 Pad Program VW Polo Remote Key

How-to: Volkswagen Polo remote programming with xtool X100 Pad and VVDI mini key tool. These both tools are very easy to use and cheaper.

Remote generate by VVDI Mini key tool
Remote programming by xtool x100 pad

Step 1: Generate remote

Remove remote PCB and connect it with vvdi key tool via USB cable
In VVDI mini key tool App, select Vehicle Remote->VW->Polo and remote type

Press Generate 

Generate remote success.

Install battery to the remote and install key shell.

Step 2: Program remote
In X100 pad, select Immobilizer->VW/Audi/Skoda/Seat V27.59->Program remote->Turn on ignition switch->VW->09 Central Control (CANBUS)->Type 1

Press any button of the remote key

Program remote success.
Done.

http://www.key-programmer.org/2019/09/06/program-vw-polo-remote-with-xtool-x100-pad/