Xtool X100 Pro2 change Porsche Cayenne 2010- odometer via OBD

Here's the quick guide on Porsche Cayenne 2010 up odometer correction using the xtool x100 pro2 via OBD in 3 minutes.

Mileage correction is so quick, simple and easy to do, and its all done via the OBD2 diagnostic port. You can also do key programming & EEPROM with the Xtool X100.

Original mileage: 105657 mile

Connect x100 pro2 with vehicle via OBD port

Select Dashboard->Europe->Porsche->Cayenne->2010 up ->Backup and mileage->Mile

Select New File

Enter new mileage you desired (i.e 400 mile) and confirm

Cummincating...
Mileage correction completed.

Check the new mileage on dashboard: 399 mile

You can also recover mileage. Select Recovery.

The mileage will be in original status.

xtool x100 pro 2 will correct mileage for following Porsche models:

911 918 996 997 Boxster Cayenne Cayman Panamera

X100 Pro2 will do mileage correction for other car brands:
Audi Buick Cadillac Chrysler Fiat Ford GMC Hummer Hyundai Kia Infiniti Jaguar Land Rover Mitsubishi Nissan Seat Skoda VW Pontiac Mercedes Ferrari Volvo Mazda Porsche But please check with the listing to make sure that your specific vehicle is covered.
http://www.obdii365.com/wholesale/xtool-x100-pro2-key-programmer.html

Program Nissan All Keys Lost with Xtool X100 Pad2

The guy lost their keys for the second time...and had already programmed a new key so when they found their old key it didn't work anymore...the key is a n101 transponder is a philips 46.
I’ve done a couple of micra k12 and qashqai standard keys with xtool x100 pad2. Done a couple of each worked ok. Reads bcm number and gives old and new pin. 

 

Select Immobilizer->Nissan/Infiniti->Read BCM code and release steering lock (4 pin code)->Read BCM code

Xtool pad2 read both new and old pin.

2008 and under models require old pin code... 2009 and up would be new pin code ..

Select Program Keys->Select from type->4 pincode->Type2 (CAN)

If not sure which type to choose, try them one by one

Turn on ignition switch and press OK to continue

Select Program Keys

Pin code is required to complete key programming.

Manually enter 4-digit pin code calculated above

Confirm PIN code

You have to complete the following procedure
1) Switch ignition off and remove key
2) Insert the 1st key and switch on for 5sec, then switch ignition off and remove key
3) If you want to add more keys, repeat same procedure until complete

 

Done.

www.obdii365.com

http://www.key-programmer.org/2020/04/08/xtool-x100-pad2-program-nissan-all-keys-lost/

Xtool X100 PAD2 Program Citroen C4 Picasso 2010 Remote Key

Citroen C4 Picasso 2010 added a new key successully using xtool x100 pad2.
Easy reads pin code with working key
Used key DIY remote ask 0523
Programed using type 1

Xtool X100 PAD2 Program VW Audi 4th 5th Immo via Online Mode

Xtool X100 PAD2 updated VW/Audi 4th 5th online programming in Feb. 2020.  Online mode is not a necessity, but offers another solution.

4th and 5th Immo online key programming for Audi

Step by step procedure:
1. Turn on xtool x100 pad2. Select Diagnosis in the side menu and then select Audi under Immobilization menu Audi key programming interface will be shown below, select 4th/5th Immobilizer system

2. Select 5th Immobilizer system. Turn on ignition and press OK

3. Select Online Mode

4.After selecting Online mode, wait for a while order payment information interface will be displayed.

5. Press Confirm payment button the order information interface and click OK in the prompt box.
Wait for payment completion and calculation result.

6. After calculation is complete, press OK.

7. Press Yes to make a dealer key

8. Connect the x100 pad 2 to the KC100 adapter and wait for the KC100 to be activated.After the activation is successfully, you will be prompted whether to bind the current device.

9. Press Yes. it will check the version information, and then wait a moment to load the firmware information.
10. After the firmware information is successfully loaded, the following interface is displayed.

11. Select Create A4/A5/Q5 key option, and put a key that ready to add to coil

12. Place the prepared key in the coil of the KC100 shown picture below

13.Click OK when wait for key creation and key data writing.

14. Make dealer key success.

15. Press Yes to Add a key.

16 Input the number of keys to match

17. Enter number of keys: 2 and click OK.
Turn on ignition switch.
All keys lost: Insert one dealer key into ignition switch ot make it close to the induction coil
Lost all: Insert a dealer key into the ignition or place it close to the induction coil
Follow the prompts and insert a dealer key into the ignition.

18. Click OK, the following message will be displayed: Aim the keys at the back of the key identification mark area, close to open the ignition switch to identify the key 2-1.
Switch to identify the key. Currently  2-1.
After success, the following message is displayed: Exit the key learning.

19. Key learning completed.

Done.

Check also:
Xtool X100 PAD2 + KC100 Program VW Audi 4th 5th IMMO key (offline mode)

http://www.key-programmer.org/2020/03/31/xtool-x100-pad2-adds-vw-audi-4th-5th-immo-online-mode/