How to use VAG Access Code for 4th 5th IMMO MQB All Keys Lost?

With Xtool VAG Point Code, Xtool X100 PAD2, X100 PAD2 PRO / X100 PAD3 will be granted for calculation access via OBD2 for VAG 4th & 5th immobilizer systems and MQB-platform, for all keys lost (AKL) key programming i.e golf 7 2013. NO EEPROM REQUIRED!

 

During this process,  internet connection is required, so that Xtool Pad is able to connect to VAG servers and perform calculation. After the calculation is done, your tablet will have unlimited access to that same vehicle.

 

After ordered from obdii365.com, you will receive an email with your activation code. Keep this email handy, because you are supposed to enter the code at the time of programming.

 

 

Xtool VAG Point Code Operation Guide:

Tap ” the vehicle system”:

1). VW 4th Immobilizer System

2). Audi 5th Immobilizer System

3). Audi MQB Platform

 

2. Tap ” Online Mode”.

3. Receive a prompt “This password needs to be paid to get it, please contact your local dealer or Xtool. Just input your code.

4. Upon inputting a valid code, the calculation will start. It will take 30 seconds to 3 minutes.

5. If the calculation succeed, you will receive a message “Get data successfully!”
   
   
   
   

If your internet was interrupted during the online calculation, you will receive a error screen (shown as below). Don’t worry, your VAG Point Code is still available to use if the calculation fails. Just have the second try to start the calculation using the same code.

 

6. Upon getting a message “Get data successfully!”, you will be able to now add a key or perform all keys lost for VAG 4th / 5th IMMO & MQB immobilizer system.

 

Enjoy!

 

Xtool Point Code is only for 10usd here:

https://www.obdii365.com/wholesale/xtool-mqb-point-card.html

Xtool Updated Audi A6 A7 A8 5th IMMO All Keys Lost

 Xtool Tech published new Audi software V28.03 adding Audi 5th generation key programming function via OBD.

 

Add all smart key lost network automatic calculation function
All smart key lost via OBD covering A6 A7 A8

This update can be applied to Xtool X100 PAD3 (X100 Pad Elite) and Xtool X100 PAD2

*Require KC501 or KC100 adapter to work with.

Solved! Xtool X100 Pro2 Update System Error

 Here offer the solution for XTOOL X100 Pro2 “System File Error!” after updating. This is the problem that has been asked by many customer recently.

 

Attach one customer’s feedback as below:

i have a tech problem with X100 pro2.

I updated the system, and when i tried to use the tool it showed “!!! System File Error!!!”.

I was talking with a mexican guy who had a similar problem, and he told me that i need the backup of the original folders that are found in the memory of the tool, so i think that would solve my problem.

 

obdii365.com engineer replied:

There is a problem with the files in the card, Please format the device and upgrade it again.

XTOOL X100 Pro2 update video:

https://youtu.be/bLbZDLO5_mo

 

Finally, the customer told us that he followed our advice to do and “It worked nicely. Thank you for your time!”

 

If you have the same problem above, please try to solve it with the method our technician provided.

Hope it helps!