Result: Success !
Disclaimer:
The test was carried out by Mexican expert. You are at your risk.
Instructions:
set up bench connection
connect module with VCI module and x100 pad, connect another end to key lock EIS (with key inserted) and power supply
In X100 pad, select Immobilizer->Chrysler->Immobiliser/Fobik (WCM)->Auto detect
Auto detect Type 4
Select Read security code
Read pin code success
Then choose to program new key/old key and follow xtool x-100 pad prompts until success.
Done.
http://www.key-programmer.org/2019/08/14/program-dodge-ram-key-with-xtool-x100-pad-on-bench/
